Fillable Sz 6nd(2) (Lutron Electronics, Inc.)

Fill Online, Printable, Fillable, Blank Sz 6nd(2) (Lutron Electronics, Inc.) Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

Sz 6nd(2) (Lutron Electronics, Inc.)

On average this form takes 11 minutes to complete

The Sz 6nd(2) (Lutron Electronics, Inc.) form is 6 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 42 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 1 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Dimmers with Neutral for Halogen, Incandescent,
Magnetic Low-Voltage, or Interfaces and Power Modules
Description
The Stanza
® system is an easy-to-install and easy-to-use lighting
control system designed especially for hotel guest rooms and similar
applications. The system consists of wallbox dimmers, wallbox
switches, line-voltage wallbox keypads, low-voltage interfaces, and
lamp socket dimmer/switches. All of these devices communicate via
radio frequency (RF) within each individual guest room.
Stanza
® dimmers with neutral, function much like standard dimmers
and switches, and have an integral microprocessor, allowing them
to be incorporated into a complete lighting control system. Stanza
®
dimmers with neutral are useful in locations where single circuits of
lighting need to be dimmed and switched. Stanza® dimmers include a
front accessible service switch (FASSTM) for safe bulb replacement.
Stanza
® dimmers with neutral, can be used for driving Lutron power
modules and interfaces when loads are required that the dimmer
does not support.
Features
•Allowslocaldimmingandswitching(toggleOn/Off)controlofone
zone of halogen, incandescent, magnetic low-voltage, or loads
through an interface.
•Lightlevelcanalsobeadjusted,ifaddressedaspartofaStanza
®
lighting control system, via an RF command from a keypad or
integration device.
•3-wayoperationcanbeobtainedusingadimmerandakeypad.
•Screwterminalsandpush-inconnectionssimplifyinstallation.
•Shallowbackcovertakesuplessroominthewallbox.
•LargecontrolsdesignedwithADAandUniversalDesign
considerations.
•Faceplatenotincluded;orderseparately.
SZ-6ND- XX
Shown with SZF-Z5-XX
faceplate
XX = Color code
N = neutral wire required
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 2 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Specifications
Regulatory Approvals:
•UL
•NOM
•cULandICA
•FCC(ComplieswiththelimitsforaClassBdigital
device, pursuant to Part 15 of the FCC rules)
Load:
•10Wminimum,600Wmaximumhalogen,
incandescent,or450W/600VAmagnetic
low-voltage
(Deratedifganged;seederatingchart)
•LutroninterfacesGRX-PWM,PHPM-PA,or
PHPM-3F
•Deratedifganged;seederatingchart
•Donotinstalldimmertocontrolstandard
receptacles or motor-operated appliances.
Contact Lutron for dimmable receptacle solution.
Power:
•Operatingvoltage:120V
50/60Hz
•Requiresaneutralwireconnection
Key Design Features:
•Backlightofsliderglowsgreen;sectionofslider
track turns amber for programming indication
•Adjustablemaximumlightlevelprovidesenergy
savings and extended bulb life
•Powerfailurememory:ifpowerisinterrupted,
when the power is restored, lights will return to
their previously set level prior to the interruption
•Onasingletap,lightsalternatelyfadetopreset
level or turn off
•Lightlevelcanbefine-tunedbymovingtheslider
up or down until the desired light level is reached
•RequiresStanza
®-specific faceplate
(order separately)
•Requiresa1-gangU.S.wallbox:3.5in(89mm)
deeprecommended;2.25in(57mm)deep
minimum
•CanbegangedwithotherStanza® controls or
with decorator controls using multigang Stanza®
faceplates
System Communication and Capacity:
•DimmerscommunicatewithotherStanza
®
system components through radio frequency
(RF)at434MHz
•MultipleRFchannelsandthousandsofsystem
addresses prevent interference between systems
•Eachdimmercountsas1towardthebasicsystem
maximum of 31 RF devices
(maximum RF devices can be increased to 100 if
anSZ-CI-PRGispresentinthesystem)
Environment:
•Ambientoperatingtemperature:
32 - 104 °F (0 - 40 °C)
•Maximum90%non-condensingrelativehumidity
•Indooruseonly
Warranty:
•1-yearlimitedwarrantystandard.2-yearparts
andlaborwarranty,with8-yearpro-ratedparts
replacement on systems that include factory startup.
Formoreinformation:
www.lutron.com/TechnicalDocumentLibrary/
Warranty_CommercialSystems.pdf
Color Codes:
(Satin Colors
®)
Button Color Code
Biscuit BI
Eggshell ES
Merlot MR
Midnight MN
Sienna SI
Snow SW
Taupe TP
Contact Lutron for other available finish options.
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 3 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Mounting
Ensure your customer will be
happy by installing this product
correctly so the switch protrudes
from the faceplate.
•Ensurealldevicesarecorrectlywiredandloosely
fastentothewallboxbeforeinstallingorreplacing
faceplates.
•Forinstallationwitharecessedwallbox,usespacer
shims(LutronPN257117)forpropersupport
of control(s).
•Formultiganginstallation,verifythattheorderof
controls in the wallbox corresponds to the faceplate
openings.
•Ensurecontrolsandsurroundingwallarefreefrom
debris (e.g. plaster, spackling compound) before
installing adapter and faceplate.
•AttachLutronStanza
® faceplateadapter
andfaceplate.
a. Align the locating posts on the control(s) to the
holes in the adapter.
b. Install the adapter onto front of control(s) using
the short screws provided. The faceplate adapter
should be firmly against the control.
c. Tighten control mounting screws until faceplate
adapter is flush to wall (do not over-tighten).
d. Snap faceplate onto faceplate adapter, and verify
that control is aligned properly and switch(es)
protrude(s) in front of the faceplate.
e. If control(s) is (are) misaligned or switch(es) is (are)
flush with the faceplate, loosen control mounting
screws appropriately.
Dimmer
Faceplate
adapter
Dimmer
mounting
screws
Faceplate
Faceplate
adapter
mounting
screws
Locating post
Locating hole
Locating post
Locating hole
STOP
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 4 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
369-441a 4 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Dimensions
4.69 in
(119 mm)
3.06 in
(77mm)
1.12 in
(35 mm)
.29 in
(7.5mm)
2.6 in
(66 mm)
1.8in
(46 mm)
0.2 in
(5.1 mm)
Radius x4
Faceplate
not shown
in rear view
4
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 5 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Dimmer Operation
Important Notice
To replace bulb, power may be conveniently
removed by pulling the FASSTM down on the
dimmer. For any procedure other than routine bulb
replacement, power must be disconnected at the
main electrical panel.
Ganging and Derating
Lutron Stanza
® faceplates are available in single-
gangandmultiple-gangversions.Whencombining
controls in a wallbox, derating is required as
indicated below.
Indicator Light in Slider Track
•Glowssoftlygreenforeasylocatingofcontrol
•Trackendsflashambertoindicateprogramming/addressingmode
Dimming Slider
•Slideuptobrighten
•Slidedowntodim
•Loadmustbeonforslidertoaffectintensity
End of gang
Middle of gang
Derated Loads for SZ-6D
Position Maximum Rating
Single (no ganging) 600WIncandescent,
450W/600VAMLV
EndofGang 500WIncandescent,
400W/500VAMLV
MiddleofGang 400WIncandescent,
300W/400VAMLV
Tapswitch
•TurnsloadOn/Off
FASS
TM
•Front-AccessibleServiceSwitch(facilitatessafebulbreplacement)
•Pulldowntoremoveallelectricalpowerfromloadanddeactivateswitch
•Pushuptorestorepowertoloadanddimmer
5
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
369-441a 6 04.12.2011
Wireless Lighting Control
Dimmer with Neutral
Stanza®
Wiring Diagram
Single Location Installation Only
System Communication Notes
•Stanza
® RF devices must be located within
30 feet (9 m) of a Stanza
® RF device configured
as a repeater. Multiple devices configured as
repeaters may be necessary to provide adequate
coverage.
•AnyStanza
® RF device can be configured as a
repeater.
•Atotalof5devicesmaximumcanbeconfigured
as repeaters.
•Devicesconfiguredasrepeatersmustbewithin
30 feet (9 m) of another device configured as a
repeater.
•Stanza® lighting controls cannot be controlled
wirelessly and Stanza
® keypads will not function
until they are addressed and programmed.
Dimmer
Neutral
120V
50/60Hz
Hot
Green
Ground
Light
fixture(s)
System Overview
Dimmer
Keypad
30 ft (9 m) max. from
repeater device
30 ft (9 m) max. from
repeater device
30 ft
(9 m) max.
Brass
Black
Silver
Feature Basic System
(noSZ-CI-PRGpresent)
Advanced System
(withSZ-CI-PRGpresent)
Maximum devices 31 100
RS232 and/or Ethernet
Interface Capability
No Yes
PCRequiredforDevice
Replacement
No Yes
6
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

Sz 6nd(2) (Lutron Electronics, Inc.)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 18 July 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document