R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-1 01.29.04
®
Wallstations
TM
Selects scene 1.
Selects scene 9.
Selects scene 13.
Selects scene 16 (all lighting full on).
Locks all other system controls.
Temporarily brightens selected zone(s).
Control Units act in combination; movable
wall open to make one large space.
Allows only temporary zone adjustment.
Preset scene settings are not affected.
Loops continuosly through scenes 5 to 16
using fade times entered at Control Units.
Entrance Wallstation
Scene Selection
Panic Wallstation
Fine Tuning
Single-Partition
Status Wallstation
Zone Lockout
Sequencing
Turns lights off.
Selects scene 10.
Selects scene 14.
Restores previous scene.
Disables lockout.
Temporarily dims selected zone(s).
Control Units act independently; movable
wall closed to make two spaces.
Disables zone lockout.
Turns sequencing off.
SG-2BN-___-___
2-Button Wallstation
Description
• Often used in entryways to turn lights on and off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it
easy to find and operate the control in low light
conditions.
• Optional button engraving is angled up to the eye
for easy reading.
• Functionality can be selected in the field.
• Status LEDs indicate which button was pushed
last.
• Works with GRAFIK Eye 3000 and 4000 Series
Control Units.
• Invokes functions in just one Control Unit or group
of up to eight Control Units.
Finish and Engraving Options
• Available with button engraving.
• Three engraving options are available: General
Engraving, Standard Engraving, & Non-Standard
Text Engraving. For more details, refer to the
seeTouch Ordering Guide (P/N 367-274) or visit
the website at www.lutron.com/seetouch.
Color and Engraving Codes
Field Selected Functionality
DIP Switches 8-10 are set at the factory. Do not change
switch 8 or 9. Switch 10 controls the button backlight.
Refer to product installation guide for more details.
Engraving
SG-2BN-WH-EGN
SG-2BI-WH-E00
(Insert version)
Off
LEDs
5 6 7
Top button:
Bottom button:
DIP Switch Settings
1
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-9 01.29.04
®
Wallstations
TM
4
3
2
1
Dimensions
Front View
Specifications
Power
Low-voltage type Class 2 (PELV). Operating voltage:12/24 V Direct Current.
Key Design Features
• Field-changeable button and faceplate assemblies allow
easy customization.
• Front accessible DIP switches allow change of function
without removing the unit from the wall.
• Meets IEC 801-2. Tested to withstand 15kV electro-static
discharge without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multi-ganging.
• Can be ganged to share a common faceplate with NovaT*
® and Vareo®
Dimmers. To order new Wallplates for multi-ganging, specify “R3” openings
in a Lutron NovaT* multi-gang FB (fins broken) Series model number.
• Use Button Replacement Kits to change color, button configuration,
or engraving.
• Button Replacement Kits may also be used to convert between
non-insert and insert configurations.
System Communications and Capacity
• Low-voltage type Class 2 (PELV) wiring connects Wallstations
to Control Units and other components.
• Up to 8 Control Units and 16 total Wallstations and/or Control
Interfaces may be connected for a total of 24 control points.
Terminals
Accept up to two #18 AWG (1.0mm
2
) typical.
Environment
32-104°F (0-40°C). Relative humidity less than 90% non-condensing.
Mounting
Typical backbox dimensions: 95mm (3.74”) high, 55mm (2.17”) wide, 70mm
(2.75”) deep.
Side View
Back View
Terminals
for Class 2
(PELV)
Wiring
1 1/16”
(27 mm)
2 3/4”
(70 mm)
4 9/16”
(116 mm)
5/16”
(8 mm)
3/4”
(19 mm)
2
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-10 01.29.04
®
Wallstations
TM
Matte Finishes
White WH
Ivory IV*
Beige BE
Gray GR*
Brown BR
Black BL
* GR, IV not currently backlighted
Color/Finish and Customizing Information
Color/Finish
Multi-ganging
Gloss Finishes
Available with Insert (I) style controls only.
Ship with Claro
® faceplates.
White GWH
Light Almond GLA
• Order Insert (I) style controls.
• To order new Wallplates for multi-ganging, specify
“R3” openings in a Lutron NovaT*
® multi-gang FB
(fins broken) Series model number.
Metal Finishes
With Black Plastic Buttons (Standard)
Bright Brass BB
Bright Chrome BC
Bright Nickel BN
Satin Brass SB
Satin Chrome SC
Satin Nickel SN
Antique Brass QB
Antique Bronze QZ
Anodized Aluminum Finishes
Clear CLA
Black BLA
Brass BRA
Backlighting Notes:
Illuminated text (translucent text
on buttons) is available for these
colors: BL and BR (including all
metal finishes).
Illuminated buttons (with black
text on buttons) are available for
these colors: WH, BE, GR, WH*,
GLA*.
* Insert (I) style controls only
Use Button Replacement Kits to change: colors, button
configuration, engraving, between insert and non-insert versions.
Each Kit includes
an adapter, button
assembly, and
wallplate
Non-Insert Kit
Examples:
Wallplate for 2 seeTouch Wallstations,
Model # NT-R3-R3-FB-(color)
Wallplate for other Lutron controls and
2 seeTouch Wallstations,
Model # NT-T8-R3-R3-FB-(color)
Note: New button inserts are not included with
multi-ganging Wallplates.
Button Replacement Kits
Insert Kit
3
R
Job Name:
Job Number:
Model Numbers:
Page
SPECIFICATION SUBMITTAL
sg-11 01.29.04
®
Wallstations
TM
DIP Switches
• Set DIP switches 1-4 to give the Wallstation a
unique system address from 1 to 16.
• Set additional DIP switches (if any) to specify
function as shown on the first page of the
Wallstation’s Specification Submittal.
• DIP switch 10 controls the button backlight.
Low-voltage Class 2 (PELV) Wiring
• Use low-voltage Class 2 (PELV) wiring to daisy-chain
Wallstations to Control Units and other components.
• Make connections inside the wallbox or in a
switch/junction box with a maximum wire length of 8
feet (2.5m) from the link to the Wallstation.
When used with GRAFIK Eye 3000 Control Units
• Two #18 AWG (1.0mm
2
) conductors for common
(terminal 1) and 12VDC (terminal 2). Ensure that the
terminal 2 connection is wired correctly. Refer to
GRAFIK Eye 3000 Series Specification Submittal.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for
data link (terminals 3 and 4).
When used with GRAFIK Eye 4000 Control Units
• Two #12 AWG (2.5mm
2
) conductors for common
(terminal 1) and 24VFW (terminal 2). These won’t fit
in terminals. Connect as shown.
• One shielded, twisted pair #18 AWG (1.0mm
2
) for
data link (terminals 3 and 4).
• Connect Drain/Shield as shown. Do not connect to
Ground (Earth) or Wallstation. Connect the bare drain
wires and cut off the outside shield.
Note: Use appropriate wire connecting devices as
specified by local codes.
4
3
2
1
Data Link - (1) twisted,
shielded pair #18 AWG
(1.0mm
2
)
3: MUX
4: MUX
Class 2/PELV
Control wiring
1: Common
2: 24VFW
D: Drain/Shield
Wallstation Rear View
(2) #12 AWG
(2.5mm
2
)
(2) #12 AWG
(2.5mm
2
)
(1) #18 AWG
(1.0mm
2
)
(1) #18 AWG
(1.0mm
2
)
Wallstation Installation
Address
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DIP Switch Settings
1 2 3 4
Reserved for GRX-PRG, if present on link.
4