SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Quantum Fixtures QSW-RPT-FOFP Quantum
3691022c 1 10.10.17
Quantum Fixtures on the
Floor Plan Software
This software license adds the following features to
the custom graphical floor plan available in your
Quantum systems web-based software
interface — Quantum Vue:
1. Monitor the status of individual fixtures
4
or
switch-legs*
2. Control and adjust individual fixtures
4
or
switch-legs*
3. Identify alerts raised by individual fixtures (for
EcoSystem/DALI only)
For any digitally addressable fixture:
View the location of the fixture within an area
1
Monitor the current light level (approximate)
View which fixture is affected by any fixture-related
maintenance alerts
2
Turn on, off, and control the intensity of a selected
fixture
Adjust the high-end trim (maximum brightness) of a
selected fixture
Supported digitally addressable fixtures:
Lutron EcoSystem
• DALI
• DMX
For any analog control output with
multiple fixtures
3
:
View the general location of the switch-leg* within an
area (including individual fixtures within the
switch-leg*)
Monitor the current light level
Turn on, off, and control the intensity of the switch-leg*
Adjust the high-end trim (maximum brightness) for the
switch-leg*
1
Accuracy of fixture locations depends on the sizes of fixtures and on the accuracy of the customer-provided floor plan images.
2
Fixture-level alerts for digitally addressable fixtures include lamp failures and ballast/driver failures. Fixture level alerts are not supported
for DMX fixtures.
3
Fixtures that are not digitally addressable can only be controlled at the switch-leg* level.
4
For EcoSystem, DALI, and DMX loads only. DMX controlled fixtures must be on unique channels to be controlled individually.
* Switch legs are the smallest controllable outputs and include dimmed or switched outputs, EcoSystem addresses, and DMX channels.
Figure 1
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Quantum Fixtures QSW-RPT-FOFP Quantum
3691022c 2 10.10.17
Supported analog fixtures:
1. 0-10 V-
2. Forward- / Reverse-phase dimming
3. ELV (Electronic Low-Voltage)
4. MLV (Magnetic Low-Voltage)
5. Switching
Requirements:
Quantum Total Light Management system (version
3.2 or later).
QSW-QVS-L, QSW-QVS-LS: One Quantum Vue
software license for lighting control is required for
each Quantum processor in the system.
If there are multiple loads within a single fixture, they
must all be part of the same lighting zone or they will
display as separate fixtures.
QSW-RPT-FOFP: One Fixtures on the Floor Plan
License is required for each Quantum processor in
the system.
Graphical Floor Plan Requirements:
Please refer to Quantum Vue spec for more details
)Lutron, Lutron, EcoSystem, Quantum, and Quantum Vue are registered trademarks of Lutron Electronics Co., Inc.
registered in the U.S. and other countries.
2