SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691001a 1 06.06.16
Wallbox ControlsC
L® DimmerLumea®
Lumea® C
L® Dimmer
Dimmer for LED, CFL, Halogen, and Incandescent
dimmable bulbs.
Features
On / Off rocker switch with a captive linear-slide
dimmer for a standard designer wallplate opening
• HED
TM Technology: Advanced Lutron® dimming
circuitry designed for compatibility with most
high-efficacy light bulbs
• UL
® Listed to control:
Dimmable LED with integrated driver
Dimmable compact fluorescent (CFL) with
integrated ballast
Halogen
Incandescent
Low-end adjustment to accommodate a wide range
of bulbs
100% factory-tested
Application Requirements
When dimming LEDs or CFLs, only bulbs
marked or rated as DIMMABLE may be used.
For a complete list of compatible DIMMABLE LEDs
and CFLs please visit www.lutron.com/dimcflled.
For questions contact our LED Center of Excellence
at 1.877.346.5338.
Some DIMMABLE LEDs and CFLs require a
minimum number of bulbs for proper operation.
For details and a list of bulbs, please visit
www.lutron.com/dimcflled.
Model Number
LECL-153P-XX
1
Single-pole / 3-way
2
1
“XX” in the model number represents color/finish code; see
"Colors and Finishes" on next page.
2
For 3-way and 4-way switching, use Claro® switches or
other mechanical switches.
Switch on
(to selected
light level),
and off
Select
light level
with slider
* Wallplate sold separately
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691001a 2 06.06.16
Wallbox ControlsC
L® DimmerLumea®
Specifications
Regulatory Approvals
UL
® Listed to US and Canadian safety requirements
UL1472 / CSA C22.2 184.1
Power and Ratings
120 V~ 60 Hz
150 W dimmable LED / CFL
or
600 W Incandescent/Halogen
or
Mixed bulb type per Multigang and Mixed Bulb
Type Ratings table (see page 3 of this document)
Environment
For indoor use only
Operating temperatures 32°F to 104°F (0°Cto 40°C)
Performance
Power-failure memory
Captive linear slider
Electrostatic discharge tested
Precise color matching
Mechanical air-gap switch to disconnect load power
Warranty
1-Year Limited Warranty
For additional Warranty information, please visit
http://www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Dimensions
4.69 in
(119 mm)
2.94 in
(75 mm)
2.75 in
(70 mm)
0.30 in
(7.6 mm)
1.31 in
(33 mm)
Note: Requires a U.S. wallbox 2` in (64 mm)
deep minimum.
Colors and Finishes
Gloss Finishes
Add color/finish code to model #
Example: LECL-153PH-WH
WH White
IV Ivory
LA Light Almond
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691001a 3 06.06.16
Wallbox ControlsC
L® DimmerLumea®
Multigang and Mixed-Bulb-Type Ratings
When installing more than one dimmer in the same wallbox, it may be necessary to remove some side sections
prior to wiring (see diagram). Removal of dimmer side sections may reduce maximum wattage, as shown in
the chart below.
Mixing bulb types (using a combination of LED / CFL, and Incandescent / Halogen bulbs) will also affect the
maximum ratings, as shown in the chart below.
Each dimmer has inside
sections removed
Middle dimmer has two side
sections removed
Do not remove outside
sections
Total LED / CFL
Wattage Installed
(Wattage per bulb x number of bulbs)
Maximum Allowable Incandescent / Halogen Wattage
No sides removed 1 side removed 2 sides removed
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
* EXAMPLE: If one set of side sections is removed and you have two 24 W CFL bulbs installed (Total CFL
Wattage = 48 W), you may add up to 300W of incandescent or halogen lighting.
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691001a 4 06.06.16
Wallbox ControlsC
L® DimmerLumea®
Switch
1
Turns lights ON and OFF. Controls light level.
Up
Increases light level
Down
Decreases light level
Slider
2
IMPORTANT: Set slider to
bottom before adjusting
dimming range.
Operation (Shown with wallplate removed)
1
3
2
1
2
3
1
2
3
1
2
3
1
2
3
Up (clockwise)
Increases brightness
Down
(counter-clockwise)
Decreases brightness
Sets low end dimming limit.
Adjustment lever
3
Lever-type Adjustment Dial
4
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
3691001a 5 06.06.16
Wallbox ControlsC
L® DimmerLumea®
Wiring Diagrams
Single-Pole Wiring
3-Way Wiring
4-Way Wiring
Note for 4-Way Wiring:
Dimmer must be installed
line-side or load-side. It
cannot be installed in the
4-way location.
Line/
Hot
Black
Dimmer
Red
Red/White
Green
Neutral
120 V~
60 Hz
Lighting
Load
Line/
Hot
Black
Dimmer
Red
Red/White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
OR
Dimmer
Line Side
Line/
Hot
Black
Dimmer
Red
Red/White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Load Side
Line/
Hot Black
Dimmer
Red
Red/White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Line Side
4-Way
Switch
Line/
Hot
Black
Dimmer
Red
Red/
White
Green
Neutral
120 V~
60 Hz
Lighting
Load
3-Way
Switch
Dimmer
Load Side
4-Way
Switch
OR
* **
*
***
*
*** ***
* **
*
***
**
* **
*
* **
* **
***
*
***
***
***
* or Brass/Gold screw terminal
** or Copper/Black screw terminal
*** or Green screw terminal
Please refer to switch instruction
sheet for proper wiring.
5